Standard Unit Reference; Accessories - Jay Electronique UC Notice Technique D'installation Et D'utilisation

3.3- Standard unit references
See UC Series sales brochure, ref: E770.

3.4- Accessories

Reference
UCCU
UWB (1)
UDC1
UCWE22X (2)
UDP1
UWE102
Transmitter
UWE301
UCE
UWE302
UWE313
UWE201
UWE202
UWE205
UWE207 (1)
OWR01 (3)
VUB084 (4)
VUB086 (4)
VUB060 (4)(5)
VUB105 (4)
VUB125 (4)
Receiver
VUB131 (4)
UCR
UWE002
UWE003
UDWR12
UDWR13
UDWR14
UDWR38
UCWR32
UCWR36 (6)
(1)= supplied with the transmitter
(2)= A programmed electronic key is delivered with the receiver, it is however
possible to order an electronic key by supplying us the following 2 parameters:
- the receiver identity code,
- the transmitter reference.
(3) = BNC antenna and BNC extension to be ordered separately.
(4) = Require BNC tuner connector kit ref.: OWR01
(5) = Not suitable for direct connection to antenna ref.: VUB086, in this case, use
an intermediate extension type VUB1••.
(6) = Require serial link board ref.: UCWR32
FR
- 6 4 -
Description
Charger 230VAC/5VDC with EU, UK and US plugs (battery pack charging)
Plug-in battery pack
Wall support for stowing when idle and battery pack in charge
Programmed electronic key (Parameters to be supplied)
Belt fastening clip
Removable shoulder strap
Protective cover for transmitter "6+2 buttons" housing model
Protective cover for transmitter "8+2 buttons" housing model
Protective sleeve for transmitter "8+2" and "6+2 buttons" housing models
Kit of 6 white/black labels, "movements", for double speed buttons (2 steps)
Kit of 6 colored labels, "movements", for double speed buttons (2 steps)
Label kit of 48 white blank labels for cutomized marking
Label kit of 90 white/black labels "movements, special functions and
customization" for switches and pushbuttons
BNC antenna plug kit for plug-in / deported antenna
(see appendix
BNC straight antenna, 1/4 wave, band 433-434MHz
BNC straight antenna, 1/2 wave, band 869MHz
BNC straight antenna, 1/2 wave, band 869MHz
2m extension for BNC antenna + bracket
5m extension for BNC antenna + bracket
10m extension for BNC antenna +bracket
4 directional colored arrows on travelling crane
4 directional black/white arrows on travelling crane
Common wiring accessory
24-pin plug-in connector + 2m cable
16-pin plug-in connector + 2m cable
Fastening Kit for receivers by magnetic contacts
Serial link board
"DialogUC" software (CD-ROM + PC/UCR cable)
EN DE
for installation procedure)
UC 323882G