Jay Electronique UC Notice Technique D'installation Et D'utilisation page 67

The transmitter UCE also has an internal memory containing an identity code.
- If the identity code of the electronic key matches the identity code stored in the
UCE, the transmitter can be started up.
- If the identity code of the electronic key and that of the UCE do not match, the
transmitter indicates the problem by its two indicator lights (3 flashes). In this
case, perform the programming procedure described in § 6.3.4.
UCE can be started up provided :
UCE identity code
Electronic key identity code
In the event of a transmitter failure :
You can recover the electronic key and connect it on a maintenance transmitter
(with same button configuration - 3 rows of double speed pushbuttons).
To perform this operation, you must reprogram the key identity code in the new
transmitter UCE as described in the procedure in § 6.3.4.
If your electronic key is lost :
You can order another programmed electronic key (ref: UCWE22X) making sure
to specify 2 parameters :
1) the receiver identity code (code on 4 digits, on receiver descriptive label).
2) the UCE transmitter reference (on transmitter descriptive label).
IMPORTANT : Store the electronic key in a safe, identified location.
UC 323882G
=
Identity code contained
in transmitter UCE
électronique
n°5 n°6
n°3 n°4
n°1 n°2
Identity code contained
in electronic key
DE EN FR
-67-