Fitting The Belt Clip; Connecting The Charging Station; Charging The Walkie-Talkies; Connecting The Headset - switel WT119 Mode D'emploi

All manuals and user guides at all-guides.com
2.3

Fitting the belt clip

After you have installed the batteries, you can fit the belt clip supplied
with the unit. Slide the belt clip into the guide from below until it
audibly engages. To remove the belt clip again, pull the fixing strap up
slightly and pull the belt clip downwards.
2.4

Connecting the charging station

Insert the plug of the power supply into the socket on the charging
station and plug the power supply into a properly installed 230 V
mains socket. For safety reasons, use only the plug-in mains power
supply provided.
2.5

Charging the walkie-talkies

The rechargeable batteries for the two walkie-talkies have a stand-by
time of max. 30 hours at room temperature and a maximum period of
use of up to 20 hours. The current battery capacity is shown in the
display.
To charge, place the walkie-talkies in the charging station for ca. 14
hours.
Full
2.6

Connecting the headset

The walkie-talkies can be used with an external microphone and
earpiece, a so-called headset. In this way, you can keep your hands
free for other activities. You will find the two connections on the top
underneath a cover.
Open the cover on the top of the walkie-talkie and plug the double
plug into the sockets. The loudspeaker and microphone in the walkie-
talkie are switched off when the headset is in use. You will find the
speech button on the miniature microphone. Make sure that the
microphone opening remains unobstructed. When using the headset,
we recommend that the keypad lock on the walkie-talkie is activated
so that no settings can be changed unintentionally.
48
- Commissioning -
almost flat No indication
Batteries are discharged