switel WTF 728 Mode D'emploi page 81

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Adding/Excluding a channel in the channel group
8 x M
X/Y, P
O
Resuming channel scanning
X or Y
Excluding a channel
49
If a channel found during the channel scanning process should
not be considered for subsequent use, it can be excluded. Press
and hold the X / Y button for 3 seconds.
All the channels are taken into consideration again when a new
channel scan is started.
a 3 sec. X or Y
Transmitting the ringing tone
The ringing tones indicate to other subscribers that you want to
talk to them. A condition for this is that the other subscribers are
using the same channel and CTCSS code.
C
a C
Selecting/Deactivating ringing tones
There are 10 different ringing tones available for selection. To
deactivate the ringing tone, select the setting 0 (zero).
Operating the Walkie−Talkies
The menu item is only available when ON" is selected
for specific channel scanning. . Page 77.
The menu position can vary. This depends on the
selection you have chosen; . Page 77.
Add or exclude the output channel
for the channel group using
ON / OFF and confirm it
Start/End channel scanning
Resume channel scanning
The channel is excluded and
channel scanning automatically
resumed
Send the ringing tone
The ringing tone is sent max. 10
times
81

Publicité

Table des Matières
loading

Table des Matières