Operating The Walkie−Talkies - switel WTF 728 Mode D'emploi

Operating the Walkie−Talkies
5 Operating the Walkie−Talkies
Description of operating sequences in the manual
P
a P
b P
[ y ]
ð
Switching the walkie−talkie on/off
a V
a V
Volume control
X/Y
Transmitting and receiving
Transmitting
47
After pressing the P button, the red LED lights up.
If the P button is pressed longer than 60 seconds, a warning
tone is issued. Transmission is terminated.
a P, ð
Receiving
48
b P
78
All the icons available appear briefly in the display. The
last channel set is then displayed together with the
CTCSS code and the red LED flashes.
If you are not going to use the walkie−talkie for a longer
period, we recommend removing the battery pack.
Hold the walkie−talkie approx. 5 to 7 cm from your
mouth and speak at a normal volume. In order to talk to
other subscribers, the respective walkie−talkies must
be set to the same channel and CTCSS code.
Press the button depicted
Press and hold the button
depicted
Release the button depicted
Display indicator
Speak into the microphone
46
Switch the walkie−talkie on
Switch the walkie−talkie off
Raise or lower the volume (15
levels)
Transmit
Receive