Sliding Doors - Before Installation - Spartherm PremiumEdition Série Notice De Montage

1.2.2 SLIDING DOORS - BEFORE INSTALLATION

Conversion of a non-self closing loading door to a self closing
loading door by removing counterweights. Carr y out the fireplace
inserts with two weight shafts in the same procedure on both sides.
1 3
Retaining Washer
Transport safety device
2 4
Weight shaft cover
5
Counter
balance
Weight shaft cover
Retaining Washer
GB 7
Follow the next steps for BOTH sides:
1. Remove the transport safety device and
fasten screws.
2. Pull the weight shaft cover upwards.
3. Release the locking ring (Allen key 2.5).
Remove the necessary counter-weights.
The number of weights to be removed
must be selected in such a manner that
the door closes slowly with a constant
speed, check the function.
4. Tighten the locking ring (Allen key 2.5).
5. Mount the weight shaft cover and secure
with a fastening screw(s).
GB