Spartherm PremiumEdition Série Notice De Montage page 46

CONTENT INSTALLATION INSTRUCTIONS
1. General instructions
1.1 Loading door
1.1.1 Self closing and non self-closing door
1.2 Conversion from self closing loading door to non-self closing
and viceversa
1.2.1 Hinged loading doors
1.2.2 Sliding doors - before installation
1.2.3 Sliding door - after installation
1.3 Assembly sequence
2. Basic requirements for setting up a fireplace system
3. Setup and combustion air supply
3.1 Location of the fireplace
3.2 The operation of the fireplace system is not at danger if
3.3 Do not install the fireplace in the following locations
3.4 Combustion air supply
3.5 Combustion air piping
4. Exhaust circuit shut-off device
4.1 Flue damper
5. Fire protection on / in the fireplace system
5.1 Special precautions for fire protection
5.1.1 Floor coverings near the fireplace
5.1.2 Combustible components
5.1.3 Fireplace inserts - Area of direct radiant heat
5.1.4 Sill beam made of hardwood
5.2 Concrete and reinforced concrete load-bearing components
5.3 Wooden beams
5.4 Insulating layers
4 5.4.1 Insulating material thickness
5 5.4.2 Protecting the mounting wall with a stud wall
5
6. Installation guidelines
6 6.1 Important information for window frame installations
6 6.2 Expansion gap between the casing and the fireplace insert
7 6.3 Fireplace Mantel
8 6.4 Connecting piece
9 6.5 Heat dissipation
6.5.1 Hot air systems
9 6.5.2 Fireplace systems with a clay lined chimney
6.5.3 Closed fireplace system casing
9
9 7. General installation instructions for installation spaces made from
9 non-combustible construction materials
10 7.1 Floors and walls
10
7.2 Floors, walls and ceiling
11
8. General installation instructions for installation spaces made from
11 combustible construction materials
11 8.1 Floors, walls and ceiling
8.2 Insulation
11
11 9. Cleaning the fireplace systems
11
13 10. Special information for Spartherm fireplace inserts
14 10.1 Flue gas outlet
16 10.2 Fireplace insert with vertical sliding door
16 10.3 Carrying aids
16
16 11. Technical Data
GB 3
16
17
18
18
20
21
21
21
21
22
22
22
23
23
24
24
25
25
25
25
26
26
27