Safety Information; Pictorial Diagrams On The Equipment - Grizzly ERM 1642 Trike Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 49
GB
nection) of a maximum of 0.354 Ohms.
The user must ensure that the device is
operated only on a power supply network
that fulfils this requirement.
If necessary, the local power supply com-
pany can be asked for the system imped-
ance.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).
The noise and vibration values have been
determined in accordance with the stand-
ards and regulations specified in the dec-
laration of conformity.

Safety information

This section covers the basic safe-
ty regulations when working with
the electric lawnmower.
22
Pictorial Diagrams on the
Equipment
Caution!
Read the operating instruc-
tions carefully.
Wear eye and ear protec-
tion.
Risk of injury from parts be-
ing thrown up.
Keep nearby people away
from the mower.
Do not expose the equip-
ment to the damp. Do not
work in the rain and do not
cut wet grass.
Caution – sharp cutting
blade! Keep feet and hands
away. Risk of injury!
Switch off the motor and
disconnect the plug before
adjustment or repair work or
if the power cable is caught
or damaged.
Danger of damaged power
cable.
Keep the power cable away
from the cutting blade!
Caution!
The lawnmower blade con-
tinues to run after switching
off.
Switch off the engine when
you leave the device. Nev-
er mow if there are people,
particularly children or ani-
mals nearby.

Publicité

Table des Matières
loading

Table des Matières