Burner Start-Up Cycle; Three Stage Operation; Burner Start-Up Cycle Diagnostics - Riello PRESS 300 T/N Manuel D'entretien

4.6

BURNER START-UP CYCLE

Normal
Thermostat
Motor
Ignition transformer
Pre-purge
st
1 flame valve
nd
2 flame valve
rd
3 flame valve
Lock-out lamp
(t ) Factory setting: 20 s.
x
This time determines the heavy oil tempera-
ture at ignition. It can be adjusted, accord-
ing to the fuel's viscosity, by the timer 22)
(Fig. 1).
The adjacent diagram shows the suggest-
ed settings.
t max = 60 s
x
Motor lock-out
It is caused by the over load relay when overload
occurs or no current supply.
Re-set: push button 7) and 10) (fig. 1).
NB.: Periodically clean the filter of the pre-heater
tank.
4.7

THREE STAGE OPERATION

rd
3 stage max.
nd
2 stage
st
1 stage
0
2543871
Lock-out because no ignition
9
GB
D2848
D3211
Viscosity at 50°C (°E)
D2749