Table des Matières
Publicité
INSP
ADJ
CONTROL SYSTEM
Turn in
Turn out
Tighten the locknut.
Install the handlebar cover.
WARNING
After adjusting the free play, turn the han-
dlebar to the right and left and make sure
that the trolling speed does not increase.
Choke cable inspection and adjustment
1. Inspect:
Choke knob
(pull the choke knob all the way out)
Choke knob automatically returns →
Adjust.
Adjustment steps:
Turn in the adjusting nut 1 until the
choke knob does not automatically
return.
QSTS cable inspection and adjustment
1. Measure:
Jet thrust nozzle set length a, b
Difference → Adjus
Measurement steps:
Set the control grip in the neutral posi-
tion.
Set the jet thrust nozzle in the center
position.
Measure the jet thrust nozzle set
length a and b.
If a and b length are not even, adjust
the cable joint.
3-4
Free play is increased.
Free play is decreased.
t.
E
Publicité
Chapitres
Table des Matières
