METREL MD 9270 Manuel D'instructions page 24

MD 9270 Leakage Clamp TRMS Meter with Power Function
LCD Screen
Data retention indication
Maximum reading indication
MAX
MIN Minimum reading indication
PEAK Peak measurement function, this is the maximum value of the wave
length of the measured magnitude, whether voltage or current
PHASE º Phase angle measurement function of the current in reference to the
voltage.
Indicates that the current is in front compared with the voltage
Indicates that the current is behind compared with the voltage
Indication of a loss, possibly due to insulation defects, only in the mA
measurement mode.
Indication of a loss, possibly due to insulation defects and accumu-
lation of non-lineal loads, only in the mA measurement mode.
Indication of a loss, possibly due to a high accumulation of non-lineal
loads, only in the mA measurement mode.
TRMS Indication that the measured magnitude is expressed in a true
efficient value.
CF Measurement function of the crest factor of the wavelength of the
measured magnitude.
AC AC input indication
Low battery indication
mA,A Milliamperes, amperes
V Volts
VAr,VAr Reactive Volt amperes, Reactive Kilovolt amperes. Reactive power
measuring units
24
Instrument Description