Operating Indicator; Statuses Preventing Restarting - MGE UPS Systems SineWave JBUS Manuel D'installation Et D'utilisation

TM
SineWave application

operating indicator

statuses preventing
restarting
The 1 status indicates a fault.
20
(cont.)
board status zone:
Filter in operation = 3 (others: filter stopped)
Status tables
Digital input:
D0: Internal fault
D1: Reserved
D2: Internal fault
D3: Overheat
D4: Overheat
D5: Overheat
D6: Overheat
D7: Reserved
D8: Reserved
D9: Reserved
D10: Reserved
D11: MERY-1 board fault
D12: Reserved
D13: Internal fault
D14: Internal fault
D15: Free
Rapid check faults:
D0: Utility power Amplitude Out of Tolerance
D1: Utility power Amplitude Out of Tolerance
D2: Utility power Amplitude Out of Tolerance
D3: Frequency Out of Tolerance
D4: Internal fault
D5: Internal fault
Slow check fault:
D0: MERY-1 board fault
D2: MERY-1 board fault
D2: l > ln
D3: Reserved
Miscellaneous faults:
D0: Internal fault
D1: Internal fault
D2: Internal fault
D3: Internal fault
D4: Internal fault
D5: Internal fault
D6: Internal fault
D7: Reserved
DSP fault:
D0: MERY-1 board fault
D1: MERY-1 board fault
D2: MERY-2 board fault
D3: MERY-2 board fault
D4: MERY-1 board fault
D5: MERY-2 board fault
D6: MERY-2 board fault
D15: Reserved
Digital input 2:
D0: Reserved
D1: Reserved
D2: Reserved
D3: Internal fault
D4: nternal fault
SineWave™ JBUS communication system installation: E-51027160XT/AC
@JBUS hexa
$1500
$1505
@JBUS
$1601
$1607
$160D
$1613
$1619
$161F
MGE UPS SYSTEMS