Location Settings; Software Update - Telestar M 12i Manuel D'utilisation

7. SETTINGS
You can adjust the backlight for both operation and standby
mode.
Use the ►◄buttons or the knob on the device and confirm with
ENTER.
E

7.2.8. Location settings

This setting allows you to set the region in which you are located.
With this setting, the radio uses the Local Radio function to
select radio stations in your area.
Use the ▼▲ buttons on the remote control or the knob
on the device to select the Location option in the System menu
press the ENTER button on the remote control or confirm by
pressing the
volume dial on the device.

7.2.9. Software update

To improve the functions of the device, it may be necessary to
update the operating software.The USB interface allows you to
update your radio's operating software, which can be downloa-
ded from www.telestar.de if necessary. The software provided on
the website must be unpacked. The unpacked file is then trans-
ferred to an appropriate storage medium and connected to the
radio via the USB port.
Please refer to the software download information for the soft-
ware update procedure.
Operating Manual 120
bda_TELESTAR_M12i_01_20_V5_DE_EN_F_NL_I_.indd 120 17.02.2020 11:31:53