Setting Up; Operation; Basic Settings - Telestar IMPERIAL DABMAN 30 Manuel D'utilisation

5. SETTING UP

Step 1:
Connect the mains power lead into the socket on the bottom left of the back of the
radio and fully extend the radio aerial in a vertical position to obtain the maximum signal
strength.
Note: Only use the power supply provided. Using an unauthorised power supply will invali-
date your guarantee and may damage your radio.
Step 2:
Plug the power adaptor into the mains power wall socket and switch on. 'Welcome to
Digital Radio' will be displayed.
Step 3:
Press the 'Power' button on the front of the radio. The first time you switch your radio
on it will automatically begin to scan for DAB radio stations. A progress bar will show
the progress of the scan and the number of stations found during the scan will also be
displayed.
When the scan is complete your radio will select the first available station and begin to
play. Stations are listed in numerical and then alphabetical order by default.
Note: The DAB radio station list is stored in the memory and so the next time you switch
your radio on, the station search does not take place. It is possible to scan manually for
stations.

6. OPERATION

6.1 Basic Settings

In Standby Mode (device not switched ON) hold the button Preset pushed for 2 seconds.
Set Contrast:
Active Backlight:
Standby Backlight:
Set Language:
Select the display contraste with the Tune switch left/right.
Push the Tune button.
Select the display backlight in opeartion mode with the Tune
switch left/right.
Press the Tune button.
Select the backlight for standby mode with the Tune
switch left/right.
Press the Tune button.
Select the menulanguage with the Tune switch left/right.
Press the Tune button.
27 IMPERIAL DABMAN 30
E