Explanation Of Symbols; Operating Instructions; Overview; Using The Adapter Charging Cable - APA 16633 Manuel De L'opérateur

4. EXPLANATION OF SYMBOLS

Complies with EC directives
Labelled electrical products may not be disposed
of in the household waste
Devices with this symbol may only be operated in
the house (dry environment)
Insulated housing (protection class II).
Fuse, here: Slow-burning, 1.6 A
Recommended battery capacity
Read the operating instructions
Corresponds to the requirements of § 21 of the
German Product Safety Law
(Produktsicherheitsgesetz)

6. OPERATING INSTRUCTIONS

Before using the device make sure that you have
read the operating instructions for the battery
and the vehicle and you have understood all of
the safety precautions.

6.1 OVERVIEW

Figure 1: Overview
A Mains cable
B Mode button
C Display
D Charging cable
E Adapter harging cable with eyes
F Adapter charging cable with pole callipers
G Hook for rolling up the cable
10
Figure 2: Display Figure 2: Display
1. Battery voltage display
2. 6 V charging programme
3. Winter charging programme
4. 12 V charging programme
5. Car charging programme
6. Motorbike charging programme
7. Battery charge status display

6.2 USING THE ADAPTER CHARGING CABLE

The adapter charging cable with pole callipers (Position F
in the overview) is used if you wish to connect the charger
in the classic way to the poles of the battery. The adapter
charging cable with eyes (Position E in the overview) is
designed to remain fi rmly attached to a battery which is
diffi cult to access. The charger can be conveniently
connected using the adapter.

6.3 PREPARATION

Clean the battery poles to remove dust and corrosion residue.
Only for open batteries: Remove the plugs of the battery
cells. Check the liquid level in the cells, consult the operating
instructions of your battery for more information. Replenish
only suffi cient distilled water to ensure that the minimum
fi lling level is achieved. The liquid will expand during the
charging process and the battery may overfl ow. Leave the
cells of the battery open until the end of the charging process.
In the event of closed and maintenance-free batteries, please
follow the instructions of the battery manufacturer to the
letter.

6.4 CONNECTING THE BATTERY CHARGER

6.4.1 CONNECTING THE ADAPTER CHARGING CABLE

WITH POLE CALLIPERS

CAUTION
Make sure that the charger is not connected to
the power socket and that the adapter charging
cable is not connected to the battery charger.
Always connect the red plus cable (+) to the positive pole
of the battery fi rst. Subsequently, connect the black minus
cable (-) to the negative pole of the battery. If you charge
the battery in situ, connect the black negative cable (-) to
the car body (exposed part), far away from the battery, the
carburettor and fuel lines. Always maintain this sequence.