Explanation Of Symbols; Operating Instructions; Overview; Preperation - APA 16631 Manuel De L'opérateur

5. Explanation of symbols

Corresponds to EC
directives
Read the operating
instructions

6. Operating instructions

Before using the device make sure that you have read the operating instructions for the battery and the
vehicle and you have understood all of the safety precautions.

6.1 Overview

1 Display
2 Selection switch for battery type
3 Selection switch for display
4 Selection switch for charging mode/jump start
5 Mains connection cable
6 Battery connector cable positive (+), (red)
7 Battery connector cable negative (-), (black)

6.2 Preperation

Clean the battery terminals to remove dust and corrosion residue.
Only for open batteries: Remove the plugs of the battery cells. Check the liquid level in the cells, consult the opera-
ting instructions of your battery for more information. Replenish only suffi cient distilled water to ensure that the
minimum fi lling level is achieved. The liquid will expand during the charging process and the battery may overfl ow.
Leave the cells of the battery open until the end of the charging process.
In case of closed and maintenance-free batteries, please follow the instructions of the battery manufacturer to the
letter.

6.3 Connecting the battery charger

Caution: Make sure that the charger is not connected to the power socket.
Always connect the red positive cable (+) of the charger (Position 6 in the overview) to the positive terminal of
the battery fi rst. Then connect the black negative cable (-) (Position 7 in the overview) to the negative terminal of
the battery. If you charge the battery in situ, connect the black negative cable (-) to the car body (exposed part),
far away from the battery, the carburettor and fuel lines. Always maintain this sequence. Now connect the mains
connection cable (Position 5 in the overview) to a power socket.

6.4 Charging the battery

6.4.1 Selecting the battery type

Press the selection switch for the battery type (Position 2 in the overview) several times to choose the correct
Labelled electrical pro-
ducts may not be dispo-
sed of with household
waste
Corresponds to the re-
quirements of § 21 of the
German Product Safety
Law (Produktsicherheits-
gesetz)
Devices with this sym-
bol may only be ope-
rated indoors (dry en-
vironment)
9