Menu User >> Energy Saving; Menu User >> Energy Saving >> No; Menu User >> Energy Saving >> Yes; Menu Technician - LAVAZZA EP 3500 PLUS Mode D'emploi

C to exit
Enter confirm
If you do not want to wash the coffee group,
press the Esc key. To run the coffee unit wash
place a glass on the tray and press the
button.
The display shows::
12
Open lever
Close lever
Open and close the capsule loading lever and
press the Enter button. The mixer wash be-
gins. After the release of about 100 cc of water
washing is over and the machine is ready.
Press the Esc button two times to exit the
13
Run washing and return to the
.
user
MENU USER >> ENERGY SAVING
The machine is programmed to be able to go
into a power saving mode after a certain period
of inactivity. The value can be changed. To bring
the machine into ready condition, open/close the
capsule loading lever or push any button.
Select the button using the
1 Energy Saving
Down buttons and pressing the
Menu user
Energy saving
In the environment, the fol-
Energy saving
lowing items are present:
NO
YES
MENU USER >> ENERGY SAVING >> NO
With this setting, the machine never goes into
power saving mode.
Select the item using the
2 NO
tons and pressing the Enter button.
Energy saving
NO
Press the Enter button to confirm.
3
NO
Press enter
The default value is restored.
NO
Executed
Press the Esc button to return to the
4
environment.
ergy saving
MENU USER >> ENERGY SAVING >> YES
With this setting, the period of inactivity is deter-
mined (expressed in hours) after which the ma-
chine enters into energy saving mode.
Select the item using the
5 YES
tons and pressing the Enter button.
MACHINE PROGRAMMING
Energy saving
Yes
Use the
6
tivity period
Enter
should be in energy saving mode and press
the Enter
Yes
En.sav.dly
Press the
7
saving environment and return to the
.
user
Use the Up/Down
8
menus ( Menu technician/Menu loader
or press the
Menu
gramming environment.

MENU TECHNICIAN

The Menu technician is an environment
dedicated to technical service personnel
with specific competence for any access it is
necessary to enter the password. To modify
it, access the
set menu
Up/
The default password is
Enter button.
MENU TECHNICIAN >> PASSWORD
Select the
1
Up/Down
button.
Menu
Technician
The display will flash five icons showing
2
the 5-digit numeric password. Set the de-
sired number by pressing the
buttons and confirm with Enter. Repeat
Up/Down but-
the operation for all five boxes.
Password?
Keep your password in a safe place.
A lost password requires a reset of the machine' s
software and means the loss of all settings other
than the manufacturer' s settings.
The display shows the
3
vironment.
Menu technician
Parameters
In the
Menu technician
En-
are present:
Parameters
Powder calibration
Selections
Data reading
Password set menu
Language
Credits
Fan management
Up/Down but-
Layout
Up/Down buttons to set the inac-
000 after which the machine
button to confirm the choice.
000h
Esc button to exit the Energy
Menu
buttons to return to other
button to exit the pro-
MENU
Menu technician >> Pw
.
00000
.
Menu technician item using the
buttons and pressing the Enter
Up/Down
00000
Menu technician
the following items
MENU TECHNICIAN >> PARAMETERS
Select the Parameters
1
Down buttons and pressing the
Menu technician
Parameters
In the Parameters
ing items are present:
Coffee temperature
Solubles temperature
Pre-time solubles
Post-time milk
Post-time chocolate
MENU TECHNICIAN >> PARAMETERS >>
COFFEE TEMPERATURE
Select the Coffee temperature
2
)
ing the Up/Down
the Enter button.
Parameters
Coffee temp.
To change the temperature in the coffee
3
boiler (110 in this example) use the
Down buttons and press
Parameters
Coffee temp.
Press the Esc button to return to the
4
rameters environment.
MENU TECHNICIAN >> PARAMETERS >>
SOLUBLES TEMPERATURE
Select the item Solubles temperature
5
ing the Up/Down buttons and pressing the
Enter button.
Parameters
Solub.temp.
To change the temperature in the soluble boiler
6
(090 in this example) using the
tons and pressing Enter
Parameters
Solub.temp.
MENU TECHNICIAN >> PARAMETERS >>
PRE-TIME SOLUBLES
The
Pre-time solubles
en-
time between the beginning of the dose counter
and the beginning of the soluble power dispens-
ing and is expressed in hundredths of seconds
(cs).
Select the item Pre-time solubles
10
the Up/Down buttons and pressing the
button.
Parameters
Pre - solub
To change the Pre-time solubles
11
in this example) use the
and press Enter to confirm.
E N
item using the Up/
Enter button.
environment, the follow-
item us-
buttons and pressing
Up/
Enter to confirm.
110
Pa-
us-
Up/Down but-
to confirm.
090
item indicates the
using
Enter
item (060
Up/Down buttons
23