Temperature/Air Humidity - Conrad 64 63 68 Notice D'emploi

 Temperature/air humidity
Once you have selected the display range for the temperature and the air humidity as described in chapter 10. d),
the button " " (9) will take you to the progression display for temperature and air humidity.
A diagram is displayed on the left side showing the temperature/air humidity change in the past 24 hours; the
measuring values and min/max values on the right side.
Please note:
• With the arrow buttons "
(display "INDOOR") and the outdoor temperature/air humidity (display "CHANNEL 1"......"CHANNEL 5").
If there are no outdoor sensors, no data will be displayed, of course. The weather station only contains one outdoor
sensor).
• With the arrow buttons "
on the right side of the display (above in the example graphic "22 HOURS AGO"); this is additionally marked in white
in the diagram on the left.
• With the button "
• The values are not continuously updated automatically in the diagram display; it only shows the values saved so
far.
• The maximum and minimum values always refer to the measuring values of the past 24 hours and cannot be
deleted manually.
50
" (5) and " " (6), you can select between the data for indoor/outdoor temperature
" (4) and " " (7), you can display the saved measuring values for the past 24 hours
" (2) you return to the overview.