Conrad 64 63 68 Notice D'emploi page 56

• "INSTALL REMOTE SENSOR" (search for available outdoor sensors): To start the search, select "Yes" with the
arrow buttons " " (5) and "
The following display appears:
Now the weather station looks for available outdoor sensors ("Searching...") . Once a sensor is found, the
measuring values appear on the display. The search process may take approx. 2 minutes. In the end you will see
e.g.:
Depending on the number of available sensor (one is included with the weather station) either the measuring values
of the sensor appear (in the image above for sensor 1 and 2) or the message "Sensor not found" is displayed.

Please refer to chapter 9. a) for commissioning the outdoor sensor.
Each sensor must be set to its own channel, otherwise the radio transmissions interfere with each other!
Press the button "
• "MASTER RESET" (reset to default settings): To reset the weather station to the default settings, select "Yes" with
the arrow buttons "

Time and date are not changed.
58
" (6) and then press the button "
" (2) to return to the main menu.
" (5) and " " (6) and then press the button "
" (9).
" (9).