Menu "Clock; Setting The Alarm Time; Switching The Alarm Function On/Off; Stopping The Alarm Signal - Conrad 64 63 68 Notice D'emploi

e) Menu "CLOCK"
• With the button "
and analog.
• With the arrow buttons "
back to the main menu, this setting is reset and a black background appears again at the next call-up.
 Setting the alarm time
• If you press the button "
buttons " " (5) and "
• If you press the button "
the arrow buttons "
• Press the button "
 Switching the alarm function on/off
With the arrow buttons "
a bell icon appears on the top right of the display.

You may not be located in the alarm time setting for this purpose (hours or minutes of the display may
not be red).
 Stopping the alarm signal
Once the alarm sounds, press any button to stop it.
 Setting the time
The time and date are set automatically via DCF signal.
If you want to set this manually, this is only possible in the menu "SETTINGS" (see chapter 10. g).
" (9), you switch to the display of the time, date and alarm time. The time is displayed digital
" (4) and " " (7), you can add a background picture to the display. When you change
" (9) on the display, the alarm hours turn red and the alarm can be set using the arrow
" (6).
" (9) on the display again, the alarm minutes turn red and the alarm can be set using
" (5) and " " (6).
" (9) again to finish setting the alarm time.
" (5) and " " (6), you can turn the alarm function on or off. With activated alarm time,
53