Technical Information
Windows Protocol
Agilent cannot guarantee compliance with ECC regulations on radiated
NOTE
emissions unless all external wiring is shielded, with the shield terminated on
the metal enclosure on the D-subconnector. The cable should be secured to the
connector with screws.
Serial Communication Descriptions
This unit can communicate using the "Windows" protocol. It can be
used as well with 232 or 485 media.
Windows Protocol
Description
Communication Format
174/192
8 data bit
no parity
1 stop bit
baud rate: 600/1200/2400/4800/9600 programmable
TwisTorr 74 FS AG On-board Controller User Manual / 87-901-054-01