Publicité
Technical Information
RS-232/RS-485 Communication Description
RS-232/RS-485 Communication Description
Both the RS-232 and the RS-485 interfaces are available on connector
J2. The communication protocol is the same (see the structure below)
but only the RS-485 manages the address field. Therefore, to enable
the RS-485, it is necessary to select the type of communication as
well as the device address by means of serial communication
commands (or using A-PLUS).
172/192
TwisTorr 74 FS AG On-board Controller User Manual / 87-901-054-01
Publicité
Chapitres
