17
Technical Information
Data Exchange Protocols
Data Exchange Protocols
This controller can manage two different serial communication
protocols (1 or 2) on its RS-232 port. During the first communication
frame after power on, the controller automatically recognizes the
type of protocol used by the host to which it will interface.
The identified protocol is kept active until the controller is powered off.
NOTE
RS-232 Protocol 1 Communication Description
Transmission Channel Characteristics
Tab. 2
levels:
baud rate:
character length:
parity:
stop bit:
protocol:
184/210
RS-232
9600/4800 programmable by W7 jumper on the board
8 bits
none
1 bit
master (PC) / slave (converter)
TwisTorr 84 FS PCB 24 Vdc Controller User Manual / 87-901-039-01 (B)