Location And Connection - EUROM B-4 1800 Manuel D'utilisation

4. The device may only be opened and/or repaired by a competent
and qualified person. Do not carry our your own repairs as this
could be dangerous! Repairs carried out by unauthorised persons or
changes made to the device could damage the dust/waterproof
capacity of the device and will nullify the guarantee and the
manufacturer's liability.
5. If the electrical cable is damaged, it must be replaced by the
manufacturer, their service department or somebody with similar
qualifications in order to prevent creating a hazard.
Failing to adhere to points 3, 4, 5, could lead to damage, fire and/or
personal injury. They will invalidate the guarantee and the supplier,
importer and/or manufacturer shall not be liable for the consequences
Description
1. control dial
2. thermostat dial
3. pilot light
4. handle
5. air intake grill
6. air outlet grill

Location and connection

 Remove all packaging material and keep out of reach of children. After
removing packaging, check the appliance for damage or other signs that could
indicate a fault/defect/malfunction. In case of doubt, do not use the appliance,
but contact your vendor for inspection or replacement.
 Select a suitable location for the device taking into account all the
aforementioned warnings in this manual.
 This radiator cannot be hung but must stand: upright (on the feet) or possibly
flat with the control dial and thermostat dial facing up.
 Make sure a functioning heater is always placed on a solid, flat and horizontal
surface.
 Check if the control dial is set to 'OFF' (O).
 Fully extend the power cord and plug into a suitable 220/240V socket. To
prevent the circuit overloading, check that no other appliances are connected to
the same group.
29