Quick Guide - boso Medicus X Mode D'emploi

Quick guide

Insert batteries, ensure correct position-
ing (P. 46)
Connect cuff to monitor (P. 50)
Attach cuff (P. 51)
Start (and stop) a measurement by
pressing the start button (P. 54)
Measured systolic, diastolic and pulse
values are displayed after the measure-
ment is completed (P. 56)
Retrieving values from memory (P. 58):
Press the START-button for about 3
seconds with the monitor switched off.
The first value displayed is the average
value of all stored measurements
together with the WHO classification.
The total number of stored measure-
ments is displayed at the same time,
e.g. "A30". The individual measure-
ment values are then displayed in
sequence.
This quick guide does not replace the
detailed information on the use and
safety of the blood pressure monitor fea-
tured in the user instructions.
Please be sure therefore to read
the user instructions!
41