Machine Start And Stop; Stopping The Machine; Machine Operation (Scrubbing/Drying) - Nilfisk ECOFLEX BA 651 Manuel D'utilisation

ENGLISH

MACHINE START AND STOP

25
Starting the machine
1. Prepare the machine as shown in the previous paragraph.
2. Insert the ignition key (80) and turn it to "I".
Check that the green warning light (81a) turns on (charged batteries).
If the yellow or red warning light (81b or 81c) turns on, turn the ignition switch back to "0" and charge the batteries (see the
procedure in Maintenance chapter).
3. Drive the machine to the working place:
• By starting it with the hands on the handlebar (2) and pushing the paddle (3) forward to move forward, and backwards to
move in reverse. The maximum forward speed can be adjusted with the adjuster (4).
4. Lower the squeegee (25) with the lever (10).
5. Lower the brush/pad-holder deck by pressing the switch (71).
6. Press the vacuum system switch (73).
7. Press the solution fl ow control switches (82) as necessary, depending on the type of cleaning to be performed.
8. Start cleaning, by moving the machine as shown in step 3. If necessary, adjust the maximum speed with the adjuster (4).

Stopping the machine

1. Stop the machine by releasing the paddle (3).
2. Turn off the vacuum system by pressing the switch (73).
3. Lift the brush/pad-holder deck by pressing the switch (71).
4. Lift the squeegee (25) with the lever (10).
5. Turn off the machine by turning the ignition key (80) to "0".
6. Make sure that the machine cannot move independently.

MACHINE OPERATION (SCRUBBING/DRYING)

1. Start the machine as shown in the previous paragraph.
2. If necessary, press the solution fl ow control switches (82) as necessary, depending on the type of cleaning to be performed.
3. If necessary, stop the machine and turn the squeegee adjusting handwheel (27) so that the rear blade (25) - in all its length -
touches the fl oor.
CAUTION!
To avoid any damage to the fl oor surface, turn off the brushes/pad-holders when the machine stops in one
place, especially when the extra pressure function is on.
18
USER MANUAL
71
2 3 4
10
27
9097293000(3)2010-03 A
72 71 72 73
82
BA 751C BA 651, BA 751, BA 851
BA 651 - BA 751 - BA 851 - BA 751C
81c 81b 81a 80
P100172C