Basic System Connection
To supply power to the camera, use the CMA-D2 camera
adaptor (not supplied).
There are two connection methods, one using a CCDC
cable and the other using a CCMC cable. The CCDC cable
only supplies power to the camera. The CCMC cable
supplies power to the camera and transmits video signals
from the camera back to the camera adaptor.
Note on use of camera adaptors
Although the CMA-D2 camera adaptor has two CAMERA
connectors (4-pin and 12-pin), the power consumption of
the DXC-950 is such that two camera units cannot be
connected at the same time. Be sure to use one camera
adaptor for each DXC-950 unit.
Note on connections
Be sure to turn off power supply for all equipment before
making any connections.
73