Angelo Po FX 82 G3T Manuel D'utilisation Et D'installation page 103

If preheating has to be ended prematurely, press the
button.
To modify the preheating temperature, press the but-
ton and proceed as described on page .
4 – Place the foods for cooking inside the cooking
chamber and close the door to start the cooking cy-
cle.
The display will show page.
Important
The light inside the cooking
chamber remains on through-
out the cycle to allow the food to
be viewed.
When the burner is lit, the spe-
cific icon is i lluminated on the
display.
5 – To feed steam into the chamber while cooking is
in progress, press the button.
6 – To display the temperature inside the chamber
and the time set while cooking is in progress, press
the button.
This function is active only if the "Multicooking"
function has not been activated.
Otherwise it will display the times of the "Multi-
cooking" function".
English
>>>
>>>
>>>
Cooking time/"Core" temperature
Percentage humidity or steam
Inizio ciclo cottura.tif
>>>
>>>
- 37 -
modify
temperature
manual cooking
Cooking time
Burner lit icon
Fan speed
time left
ECO/PLUS
vent percentage
modify
parameters
end preheating
Time
display
steam injection
measured data
steam
injection
display
measured data
Use and installation manual
IT
GB
DE
FR
ES