Fresh Function; Sleep Function; Follow Me Function; Ap Function - Olimpia splendid PHENIX E INVERTER 9 Mode D'emploi Et D'entretien

3.5.7 - Fresh function

Activating this function, the ions generator is activated and air in the room will be purified.

3.5.8 - Sleep function

this function is used to reduce the consumption of energy.
This function can only be activated through remote controller.
The function is not available in FAN or DRY mode.

3.5.9 - Follow Me function

the remote control displays the real temperature in its own position and sends this signal to the air conditioner
every 3 minutes, until the button is pressed again.
if the unit does not receive the follow me signal for 7 minutes, it emits a "beep", which signals that the follow
me mode has ended.
The Follow Me function is not available in the DRY and FAN mode.
• if the operating mode is pressed, or the unit is switched off, the follow me function is annulled automatically.

3.5.10 - AP function

to access the function, continuously press the leD button seven times in 10 seconds.
This function can only be activated with separate Kit.

3.5.11 - Eco/Gear

ECO
a. Press key "eCo" (3) to select the mode "eCo".
b. the remote controller will automatically set temperature at 24 °C/75 f.
c. Pressing the button, changing the mode or adjusting the set temperature at less than 24 °C/75 f will
deactivate the function.
GEAR
a. Press key "eCo" (3) to select "Gear" mode (up to 75% of consumption of electric energy or, if pressed
again, up to 50% of consumption of electric energy).
b. the display of the remote controller alternates the indication of electric energy consumption and the set
temperature.
c. Pressing the button, changing the mode or adjusting the set temperature at less than 24 °C/75 f will
deactivate the function.

3.5.12 - Lock function

a. Press key "tUrBo" (10) and key "Clean" (12) together simultaneously for more than 5 seconds to
activate the function.
all the buttons are locked.
b. Press key "tUrBo" (10) and key "Clean" (12) again simultaneously for more than 5 seconds to deac-
tivate the function.
EN - 31
PHENIX E INVERTER