Removing The Oven Door; Removing The Oven Window - Pelgrim OVM416 Mode D'emploi

CLEANING

Removing the oven door

Removing the oven window

Keep your fingers away from the hinges of the oven door. The hinges
are spring loaded and can cause injury if they spring back.
Make sure that the hinge latches are applied correctly to lock the
hinges.
1. First, fully open the door (as far as it will go).
2. Rotate the stoppers back by 90°.
3. Slowly close the door until the stoppers are aligned with the hinge
beds. At the angle of 15° (relative to the closed door position),
slightly lift the door and pull it out from both hinge beds on the
appliance.
To replace the door repeat these actions in reverse. If the door does not
open or close properly, make sure the hinges are positioned correctly in
their slots.
The glass in the oven door can be cleaned from the inside, but you do
need to remove the glass from the door to do this. First remove the
oven door (see chapter 'Removing the oven door').
1. Lift the brackets on the left and right side of the door upwards
EN 19