Removal And Installation Of The Oven Door - Pelgrim OVP436 Notice D'utilisation

MAINTENANCE

Removal and installation of the oven door

Keep your fingers away from the hinges of the oven door. The hinges are spring
loaded and can cause injury. Make sure that the hinge latches are applied correctly
to lock the hinges.
1. First, open the door to the fully horizontal position.
2. Slightly lift both latches and tilt them towards the door.
3. Slowly close the door to the angle of 45° (relative to the closed door position).
4. Slightly lift the door and pull it out from both hinge slots on the appliance.
1
To replace the door, repeat these actions in reverse. If the door does not open or close properly,
make sure the hinges are positioned correctly in their slots.
EN 18
2b
2a
3
4