Pelgrim OVM416 Mode D'emploi page 83

USE
• The pictogram for the 'preparation time' lights up on the display.
• Press the 'less or more button' to set the preparation time.
• Press the 'timer button' to save the set time.
• Press the 'timer button' again twice.
• The pictogram for the 'end time' lights up on the display.
• Press the 'less or more button' to set the end time.
• Press the 'start/stop button' to start the cooking process.
The oven starts at the set time minus the preparation time.
The elapsed preparation time will then be displayed.
Example:
• Current time: 12:00
• Cooking time: 2 hours
• End of cooking: 18:00 hours
• First set the preparation time, for example 2 hours (see 'Setting a
preparation time'). Then set the end time (6 p.m.) (see 'Setting an
end time').
• Press the 'start/stop button' to start the cooking process.
The timer will delay the cooking process until the appropriate
time. The pictogram will now light up. The oven will switch on
automatically (16:00 hours) and switch off at the selected time
(18:00 hours).
The oven will switch off automatically once the set time has elapsed
(end of cooking). A signal will sound that you can switch off by
pressing the 'start/stop' or 'timer' button. The sound signal will stop
automatically after one minute.
'Timer alarm' function
• The 'timer alarm' function can be used independently of the oven.
The highest possible setting is 23 hours and 59 minutes.
The last minute of the run time is displayed in seconds.
You can cancel all timer functions by setting the time to '0'.
If the appliance has been inactive for a few minutes, it will switch to
standby. The current time appears and the selected timer function will
light up.
EN 15