Pelgrim OVM416 Mode D'emploi page 85

USE
More button
Less and more
button
Reduce display contrast
• Press and hold the 'more button' for 5 seconds.
'Bri' appears on the display followed by several bars that are fully lit.
• Press the 'less or more button' to adjust the dimming level (one, two
or three bars).
The setting will be saved automatically after three seconds.
Please Note! Turn the function knob and temperature knob to 'Off'
position after each use.
Following a power failure the additional function settings will only
be saved for a few minutes. All settings, except the sound signal
and child lock, will then revert to factory settings.
EN 17