Use; Initial Use - Pelgrim OVM416 Mode D'emploi

USE

Initial use

Less and more
button
Start/Stop button
Timer button
Oven function dial
Temperature dial
Grill setting
(also usually 250 °C)
Set the current time
When you connect the appliance to the mains electricity for the first
time, the display lights up.
'12:00' will flash on the display.
1. Press the 'less or more button' to set the current time.
You can set the values in the display faster by holding down the
buttons for longer.
2. Confirm the settings by pressing 'start/stop'.
If you do not press anything, the settings will be saved automatically
after three seconds.
You can always set the current time by pressing the 'timer button'
twice. Then set the current time using the 'less or more button'.
Confirm the settings by pressing 'start/stop'.
Using your oven
The oven has 8 oven functions and 1 cleaning function.
table to select the correct oven function for the dish.
1. Place the dish in the oven.
For most dishes you should first preheat the oven.
2. Turn the 'oven function dial' to the desired setting.
The 'in operation' symbol will appear on the display.
3. Set the oven to the desired temperature using the 'temperature dial'
(between 50-275
°C)
If you select a setting with 'small grill/large grill', you should turn the
'temperature dial' to the grill setting.
4. If desired, set a cooking time by pressing the 'timer button' and use
the 'less or more button' to set the desired time.
5. Press the 'start/stop' button.
The set oven function will be started and the oven will be heated to
the selected temperature. The temperature symbol will flash. When
the oven reaches the set temperature, the symbol will light up and a
short beep will be sounded.
After three seconds the clock symbol and
.
Consult the
EN 7