Technical Description - Anselmo Cola TERMOPERLA PLUS Manuel D'installation, D'utilisation Et D'entretien

1.4 Technical description

The stove works exclusively on pellets and enables easy installation with the heating system. The stove's automatic
control systems guarantee optimum heat output and complete combustion; there are also safety systems to
guarantee safe operation for the stove parts and for the user.
When correctly installed, the unit works in any outside climatic conditions, and in any case in critical conditions
(strong wind, frost, etc.) the safety systems can cut in, shutting down the stove.
The stove model TERMOPERLA PLUS with nominal power of 21.2 kW ensures a maximum heatable volume of
517 m3, considering the coefficient of a building's energy requirements equal to 35 W/m3, and may vary depending
on the insulation, type and climatic zone which are important variables for the correct choice of unit.
For technical data, refer to the table on page 5.
TERMOPERLA PLUS pellet heating stove dimensions
Key:
A - Power cable connection
B - Combustion air inlet
C - Water drain in overpressure (1/2" female)
D - Water supply connection
E - System return (3/4" male)
F - System delivery (3/4" male)
G - Flue pipe connection Ø80mm
H - Control panel model EVO
I - Pellet hopper door
L - Adjustable feet
M - Turbulator shaker knobs
37
TERMOPERLA PLUS