Care And Cleaning; General Information; Cleaning The Hob; Troubleshooting - Progress PES6061E Notice D'utilisation

8 Progress
Cookware
The bottom of the cookware
must be as thick and flat as
possible.

CARE AND CLEANING

WARNING! Refer to Safety
chapters.

General information

• Clean the hob after each use.
• Always use cookware with clean
bottom.
• Scratches or dark stains on the surface
have no effect on how the hob
operates.
• Use a special cleaner applicable for the
surface of the hob.
• Use a special scraper for the glass.

Cleaning the hob

• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar. If

TROUBLESHOOTING

WARNING! Refer to Safety
chapters.
What to do if...
Problem
You cannot activate or oper‐
ate the hob.
Residual heat indicator does
not come on.
There is a dark area
on the multiple zone.
not, the dirt can cause damage to the
hob. Take care to avoid burns. Put the
special scraper on the glass surface at
an acute angle and move the blade on
the surface.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration.
Clean the hob with a moist cloth and
non-abrasive detergent. After cleaning,
wipe the hob dry with a soft cloth.
• Remove shiny metallic
discoloration: use a solution of water
with vinegar and clean the glass
surface with a moist cloth.
Possible cause
The fuse is blown.
The zone is not hot because
it operated only for a short
time or the sensor is dam‐
aged.
It is normal that there is a
dark area on the multiple
zone.
Cookware made of enamelled
steel and with aluminium or
copper bottoms can cause the
colour change on the glass-
ceramic surface.
Remedy
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
If the zone operated suffi‐
ciently long to be hot, speak
to an Authorised Service
Centre.