Installing The Effective Load - Festo SLTE-10 Série Notice D'utilisation

SLTE

Installing the effective load

S
Place the effective load so that the tilting
torque of the force parallel to the move­
ment axis and lever arm "a" remains low.
S
Make sure that the loadings of the SLTE
are lower than the maximum permitted
values (see chapter "Technical Specifica­
tions" and "Characteristic Curves"
as well as catalogue specifications).
S
Secure the effective load to the mounting threads with centring re­
cess 8, 9 or aJ.
SLTE-...
Drill hole
Socket head screw to DIN912
Centring sleeves
Max. screw-in depth
Min. screw-in depth
tightening torque
Fig. 8
Festo SLTE 1505b English
a
Fig. 7
10
8 9
M3 M4
[mm] ZBH-5
[mm] 6.5 7.5
[mm] 3.5 4.5
[Nm] 1.2 2.9
F
16
aJ 8 9
M4 M4 M5
ZBH-7
7.5 8.0 9.5
4.5 4.5 5.5
2.9 2.9 5.9
aJ
M5
ZBH-5
6.5
5.5
5.9
33