Festo SLTE-10 Série Notice D'utilisation page 40

SLTE
SLTE-...
Lead screw pitch
Gear unit ratio
Max. speed
Max. permitted speed
Max. acceleration
Electrical specifications
Rated motor voltage
Motor output
CE marking (see declaration
of conformity)
è www.festo.com/sp
– Max. cable length
Vibration (severity 1)
Shock (severity 1)
Protection class
Permitted temperature
range
Connecting tube
Weight (approx.) [kg]
– 50 mm stroke
– 80 mm stroke
– 100 mm stroke
– 150 mm stroke
Max. permitted speed and effective load depend on each other (see chapter
1)
"Characteristic curves").
The device is intended for use in an industrial environment. Outside of industrial environ­
2)
ments, e.g. in commercial and mixed-residential areas, actions to suppress interference may
have to be taken.
Fig. 16
40
10
5 mm
n = 57:13
1)
170 mm/s
2 mm/s
2.5 m/s
To be used only in conjunction with controller SFC-DC
24 V DC
4.5 W
in accordance with EU EMC Directive
2)
30 m
0.15 mm path at 10...58 Hz /
2 g acceleration at 58...150 Hz
15 g acceleration at 11 ms duration
IP40
0 ... + 40°C
Housing, slide,
moment compensator, drive rod:
Guide, spindle:
Bearing:
ethylene
0.57
0.74
—
—
16
7.5 mm
210 mm/s
2
18 W
1.19
1.47
1.71
2.20
aluminium
steel
polyamide, poly­
Festo SLTE 1505b English