Care And Maintenance - Festo DGO-12-A-B Notice D'utilisation

DGO−...−A−B
Make sure that the operating medium selected at the start is maintained for
S
the entire service life of the product.
Changing from lubricated to non−lubricated compressed air:
Wear will increase due to the washed−out service life lubrication.
Return the DGO−... to Festo for overhaul.
S
If modifications are made to the project planning:
Make sure that the maximum limits are observed, especially for forces and
S
torques (see Bild 8) and maximum speeds (see Fig. 9).
9

Care and maintenance

Clean the cylinder barrel if required with a soft cloth.
S
The following cleaning agents are permitted: all non−abrasive media.
Lubricate the DGO−... at the lubricating nipple with Festo special grease type
S
LUB−KC1 (silicon−free).
Lubrication intervals: every 500 kilometres run
Note that lubrication must be undertaken more often:
S
if the drive is operated in high temperatures
if there is excessive dirt
if there are fat−solvent fluids or fumes in the vicinity.
10 Repairs
Make use of the opportunity to have your DGO−... overhauled by our repair
S
service.
28
Festo DGO−...−A−B 0410b English