Tecno-gaz Ekstra Plus PT001TTM Mode D'emploi page 45


The space above the machine must not have wall cabinets or shelves that could prevent
access to the liquid filler inlets.

The lighting system of the installation area must comply with current regulations.

Before placing the machine, calculate the height of the counter according to the height of the
operator.

Before positioning the machine, calculate the correct height of the worktop. The operator must
be able to easily see the display and access the filler inlets.
Fig. 11
AN INCORRECT GRADIENT CAUSES RESIDUE TO DEPOSIT AT THE BOTTOM OF THE
CHAMBER
Minimum 80 kg
ENGLISH
Place the machine on a counter
that is at least 90 cm high and
perfectly level.
Place the device so as to allow the
operator to easily inspect and
clean the device. The operator
must be able to access the back of
the device
Place on a perfectly level surface,
which is stable and can withstand
loads of at least 80 kg. The
supports of the device can be
slightly adjusted.
11