Tecno-gaz Ekstra Plus PT001TTM Mode D'emploi page 54

ENGLISH
09 / 12 / 13
SCREEN D7
Press the button below EXIT at any point while modifying the data and the changes are
saved before returning to MENU in screen C (Para. 7.4).
3) TECHNICAL MENU
With the cursor on TECHNICAL MENU, press OK to confirm and the password field is highlighted.
The user cannot access this menu.
4) LABORATORY DATA SETTINGS
VERSION : xxx
CLINIC:xxxxxxxxx
ADDRESS:xxxxxxx
POSTCODE:xxxxxxx
CITY: xxxxxx
PROVINCE:xxxxxx
DATE:xxxxxx
COMPLETE CYCLE
START:xxxxxxx
END:xxxxxxx
STATIONS
: 1 2 3 4
CYCLE OK
20
DATE
TIME
03:29
OK
EXIT
SCREEN D6 - OK
The time is changed by moving the underlining
to the hour with the NEXT command.
The hour and minutes are set in the same way
as the date.
As mentioned, the user can store all the
cycles performed on the SD card.

Device data

Part of the customised text report on
the user's computer. The user can enter
the clinic's data and/or other text with
notes that are deemed relevant:
Create/complete the text file in the SD
card and name it SET_UP.TXT.

Cycle data:
- Type of cycle selected;
- Cycle start/end;
- Stations concerned;
- Cycle result or alarm message.