Indications In The Display; Hob Functions Table - ETNA KIF577ZT Mode D'emploi

USE

Indications in the display

In display Status
Power setting cooking zone; 1 = low setting / 9 = high setting
Boost function active
Timer link indication
Bridge cooking zones link function selected
No (suitable) pan on cooking zone (pan detection symbol)
Key lock function active
Residual heat indicator; The hob has a residual heat indicator for each
cooking zone to show those which are still hot. Although the hob is switched
off, the indicator 'H' will remain on for as long as the cooking zone is hot!
Avoid touching them when this indicator is lit. Danger! Risk of burns.
Fault code; See 'Troubleshooting table'

Hob functions table

Function Key(s) to use
Link
Timer
Lock
Boost
Description
The Bridge cooking zones can be linked to each other.
This creates one large zone that can be used for a large fish
pan or one large cooking pan.
▷ Use a (fish) pan where at least one of the centre/
middle positions of the Bridge zones is covered.
The timer can be set separately for each cooking zone.
Cooking times of up to 99 minutes can be programmed.
The timer alarm beeps after the set time has passed.
The cooking zone automatically switches off when the set
time has elapsed. When no cooking zone is selected the
timer works as a minute minder (no automatic switch off).
Key Lock function; to lock the keys during operation. It will
not be possible to make any adjustments by touching the
keys. Only the On/off key will be active to be able to stop
operation of the hob.
You can use the boost function to cook for max. 5 minutes
at the highest power level. The boost function can only be
activated if it is applicable with the cooking zone selected.
EN 11