Angelo Po FX 61 G1/2 Manuel D'utilisation Et D'installation page 50

Important
To return to the original settings, with the appli-
ance in the STOP phase (icon (16) lit with a green
light) press the button (12) and hold it down for
longer than 3 seconds (the whole panel powers
down) then press the button (18) and hold it down
for at least 3 seconds.
19 – Quick cooling key: for cooling the cooking
chamber quickly with the door closed.
Press the key and the display (7) will show the mes-
sage "100°C".
Press the key (4) and turn the knob (21) to set the
cooling temperature required.
Press the key (16) to start the program.
At the end of the cycle the appliance shuts down and
a buzzer sounds.
- is used to enable / disable the cooldown during
cooking.
With the appliance in the STOP phase (icon (16) lit
with a green light) press the button (12) and hold
it down for longer than 3 seconds (the whole panel
powers down)
Press button (19) and turn the knob (21) to set the
cooldown ON/OFF
Important
Do not use this function while cooking is in
progress.
20 – Semiautomatic washing button: selects a
semiautomatic wash.
21 – Control knob: for varying the values of the func-
tions selected (see buttons (4-5-6-10)).
Turn the knob clockwise to increase the value and
IT
anti-clockwise to decrease it.
GB - Used to modify the cooking and washing pro-
gramming parameters and the appliance's func-
DE
tional parameters.
- Also confirms and saves: press the knob to confirm and save the settings selected
FR
and/or shown on the display.
22 – On/off button: turns the appliance's electricity supply on and off.
ES
English
1
7
4
5
6
12
13
16
17
18
21
- 12 -
2 3
8
9
10
11
15
14
20
19
22
IDM-39619500300.tif
Use and installation manual