Technical Specifications; Overview Of The Welding Process - Hürner Hydr. 630 Manuel Utilisateur

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
3.4 Technical Specifications
HÜRNER Manual Hydr. 630
Power Specifications
Voltage
Frequency
Total Rated Powe
Heating Element
Facing Tool
Hydraulic & Control Unit
Hydraulic Specifications
Operating Pressure max.
.
Cylinder
Ambient Temperature Range
Hydraulic Oil
Operating Range
Dimensions
Basic Machine Chassis
Facing Tool
Heating Element
Hydraulic & Control Unit
Carrying and Storage Rack
Weights
Basic Machine Chassis
Facing Tool
Heating Element
Hydraulic & Control Unit
Carrying and Storage Rack
All Reducer Inserts

3.5 Overview of the Welding Process

The welder performs the welding process in the following manner:
• Applicable welding times and pressures are looked up in the
overview tables in the appendix.
• Pipes are clamped into the frame.
If pipes with an outside diameter smaller than the maximum
dimension of the machine are welded, select the reducer set
needed. The 8 individual inserts of the set that matches the out-
side diameter of the pipe to be welded have to be attached to
the clamps of the machine chassis using the provided bolts.
• Pipe butts are worked using the pipe facing tool.
• Pipe alignment is checked.
• The drag pressure, i.e. the minimum pressure to set the carriage
in motion and "drag" it along, is recorded at the machine.
• The pressures relevant to the welding operation are set.
• The heating element is inserted after cleaning it and checking its
temperature.
• The welding process proper is performed (see section 4), and the
operator waits for the jointed pipes to cool down.
• After the cooling time is over, pressure can be shutt off from the
pipes and the joint can be taken out of the chassis.
Version October 2020
400 V 3 Ph * N
50 / 60 Hz
11.65 kW
8.10 kW
1.85 kW
1.70 kW
160 bar
31.40 cm²
–5°C to +50°C
HF-E 15
315 through 630 mm
1200 x 900 x 900 mm
830 x 230 x 1000 mm
1050 x 60 x 800 mm
600 x 360 x 290 mm
870 x 970 x 700 mm
173 kg
98 kg
38 kg
39 kg
40 kg
250 kg
HÜRNER Manual Hydr. 630 User's Manual
9
EN