A
E
B
D
4.1-1
4.1-2
F
C
2
4.1 Controls
Before operating the machine ensure that you have well
understood the operation and function of all the controls
(Fig.
4.1-1).
A. Press down and release, WITH LEFT FOOT, the fi rst
pedal from the left: the column tilts backwards.
Do it again: the column tilts forward.
DANGER OF BODY CRUSHING
B. Press down and release, WITH LEFT FOOT, the
second pedal from the left: the clamps of the turntable will
retract. Do it again: the clamps will expand. If you press
the pedal prior to the end of the stroke and release, the
clamps may be stopped in any position.
C. Press down and hold, WITH
pedal from the right: the turntable turns clockwise.
Lift the pedal and the turntable turns counter-clockwise.
D. Open the bead breaker arm. Press down and hold,
WITH LEFT FOOT, the
doing this you operate the bead breaker blade and the
arm will move towards the machine. Release the pedal:
the bead breaker blade will retract.
DANGER OF LEG TRAPPING
E. The push button on the handle allows to release the
arms and drive the mount/demount tool in the correct
position.
1.
To unlock and let the slide with the tool go up: push the
button fi rmly with the forefi nger, in the direction of the
arrow (A, Fig. 4.1-1).
2.
To unlock and let the slide with the tool go down: push the
button with the thumb in the direction of the arrow, until
the resistance increases (B, Fig. 4.1-1).
3.
To lock: push the button fi rmly with the thumb
4.1-1).
DANGER OF HAND CRUSHING
F. Press bead seater/infl ator pedal on left side of the
machine down
(1, Fig.
4.1-2): air will come from infl ation
hose end (1).
WHEN OPERATING THE INFLATOR IT IS MANDATORY
TO WEAR EAR PROTECTORS AND SAFETY GLASSES
TO PREVENT CONTAMINATION FROM NOISE, DUST
AND CHIPS BLOWN BY THE AIR JETS.
RIGHT
FOOT, the fi rst
second
pedal from the right: by
(C, Fig.
15
EN -