Controls - Hofmann monty 1520-2 Notice D'utilisation

F
A
B
D
4.1-2
24
E
D
C
4.1-1
D
4.1-3
monty 1520-2

4.1 Controls

Before operating the machine ensure that you have well
understood the operation and function of all the controls
(Fig. 4.1-1).
A.
• Press down and release, WITH LEFT FOOT, the
first pedal from the left: the clamps of the turntable
will retract. Do it again: the clamps will expand. If
you press the pedal prior to the end of the stroke
and release, the clamps may be stopped in any
position.
B.
• Open the bead breaker arm. Press down and hold,
WITH LEFT FOOT, the second pedal from the left:
by doing this you operate the bead breaker blade
and the arm will move towards the machine. Release
the pedal: the bead breaker blade will retract.
C.
• Press down and hold, WITH RIGHT FOOT, the first
pedal from the right: the turntable turns clockwise.
Lift the pedal and the turntable turns counter-
clockwise.
DANGER OF LEG TRAPPING
D.
• The lock handle enable the mount/demount tool to
be locked in the working position. Lower the lock
handle to unlock (Fig. 4.1-2) the vertical slide, lift
the handle to lock (Fig. 4.1-3).
E.
• Turn the adjustment knob (1, Fig. Fig. 4.1-1) for
positioning mount/demount head according to rim
diameter.
For machines without Tubeless wheel system:
F.
• Press bead seater/inflator pedal on left side of the
machine (2, Fig. Fig. 4.1-1): air will come from inflation
hose end only.
WHEN OPERATING THE INFLATOR IT IS
MANDATORY TO WEAR EAR PROTECTORS AND
SAFETY
CONTAMINATION FROM NOISE, DUST AND CHIPS
BLOWN BY THE AIR JETS.
Operator's Manual
GLASSES TO
USA - CANADA
PREVENT