switel DCT 567 Série Mode D'emploi page 147

Remote access
142
You can call your answering machine from another telephone to play
messages or execute other functions. A condition for this function is
the use of a phone using the tone dialling function and that REMOTE
ACC." in the main menu is set to ON"; . Menu Structure, Page 151.
PIN code for remote access
The default setting of the PIN code is 0000". It is recommended to
change the PIN code to prevent unauthorised persons having simple
access to your answering machine.
Changing the PIN code; . Page 151.
Starting remote access
ë
*
The Star button must be pressed while the outgoing mes-
sage is being played. Therefore, it is important that the out-
going message is sufficiently long; . Recording an outgo-
ing message", Page 143.
ë
The PIN code must be entered directly after pressing the
Star button, do not wait too long.
If the PIN code is entered incorrectly three times, the connec-
tion is interrupted.
After entering the PIN code correctly, an acoustic signal indicates that
you can now enable various optional functions; . Table Remote ac-
cess, key function assignment".
l
Dial your own telephone number
and wait for the outgoing message
Press the Star button while the
outgoing message is playing
Enter the PIN code
Press the button/buttons to
activate the required function
Remote access, key function assignment
The following table provides an overview of the respective functions
assigned to the individual buttons.
Key Functions when no messages
are played
2
2 x Delete all old messages
2
4
2 x
4
5
Play the message
6
2 x
6
7
Activate the answering
machine
9
Switch off the answering
machine
‹
End remote access
Every remote access process is automatically cancelled if
there is no input within 10 seconds.
Answering Machine
143
Functions when messages
are played
Delete message during play-
back
Repeat playback of current
message
Play the previous message
Stop playback
Play the next message
Play the next message but
one
End remote access
147