Preliminary Information - switel DCT 567 Série Mode D'emploi

Preliminary Information

4 Preliminary Information
This chapter provides basic information on using the operating in-
struction manual and the telephone.
Description of operating sequences in the manual
Display Description
l
Displays the contour of buttons
M
Press the button depicted briefly
3 sec. I
Press the button depicted for 3 seconds
Hold A
Press and hold the button depicted
Release A
Release the button depicted
ë
Enter digits or letters
{í}
Handset rings
{ì}
Base station rings
è
Remove the handset from the base station
é
Place the handset in the base station
Texts which appear in the display
REGISTER
Icons which appear in the display
x Denotes numbers which could differ, e.g. for the
model identification of the device, numbering of
the ring tones or numbering of the handsets.
130
Icons and texts in the handset display
Top bar of icons
The icons at the top of the display indicate function status.
Icon Description
Continuously on: Handset within range of the
base station.
Flashing: Handset out of range of the base sta-
tion.
Continuously on: An internal call is in progress.
Flashing: An internal call has been received.
Or: An internal handset has been dialled.
A call is in progress.
The handsfree facility is activated; . Page 135.
Continuously on: The alarm has been set.
Flashing: The alarm is ringing.
Telephone answering machine icon
Continuously on: The answering machine is on.
Flashing: The answering machine is switched on
and new messages have been recorded.
Key lock activated; . Page 136.
The ringing tone of the handset is deactivated;
. Page 136.
Indicates the battery capacity (full, empty).