Telephoning
Switching the loudspeaker in the handset off
The handset's ringing tone can be switched off. Activate Standby
mode and proceed as follows:
Hold down #
An incoming call is then only indicated in the display;
. Call indicator".
Hold down #
Searching for the handset (Paging)
If you have mislaid your handset, you can locate it again with the aid
of a search (paging) tone.
c {í}
c or I
The paging tone continues to ring for 60 seconds if not stop-
ped manually beforehand.
If a call is received while paging, the paging tone is stopped
and the phone rings normally.
Key lock
128
The key lock feature prevents functions assigned to buttons being
activated accidentally.
Hold down *
Hold down *
Switching the handset off and on
You can switch the handset off to save the battery pack.
5 sec. I
5 sec. I
136
126
Switch the loudspeaker off
Switch the loudspeaker on
127
Activate the paging tone
Deactivate the paging tone
Activate the key lock
Deactivate the key lock
Switch the handset off
Switch the handset on