Medela Clario Toni Mode D'emploi page 27

Canister, Pump housing
SafetyChamber Mains cable
x x
x
x
x
x
1. Disassembly
Separate all individual parts before cleaning, disinfecting and steril-
ising�
2. Cleaning canister, SafetyChamber
Clean components in hot water (60–70 °C) containing a detergent
with a pH range between 6�0 and 8�0 only, in order to avoid dam-
aging the instruments and containment devices� Enzymatic deter-
gents help with the removal of organic matter, such as blood�
Detergents should be used according to their manufacturer's rec-
ommended concentration levels� Some alkaline detergents have
been formulated to be safe for reprocessing medical devices� The
manufacturers of these detergents should provide information
about specific materials that may be damaged by their detergents�
Soak all parts thoroughly with warm, soapy water or in enzymatic
detergent for 1–5 minutes�
1. Remove visible dirt with a cleaning tool – general purpose clean-
ing brushes, such as pipe cleaners or non-abrasive lint cloths�
Brushes and pipe cleaners should fit snugly but still be able to be
moved around easily within the area to be cleaned� Rinse thor-
oughly in clear water� Allow to dry
2. Check the instruments for visible dirt and repeat these steps if
necessary�
3. Cleaning pump housing, mains cable
Wipe with detergent mentioned above� Use clean cloth to dry�
4. Disinfect
Soak at room temperature for 30 minutes in a disinfection/cleaning
solution (A)� After the reaction time, use water to rinse the solution
residue from the individual parts and rinse the tubing� Rinse for at
least 2 minutes with the cleaning solution (B)�
(A) fluid aldehyde-free disinfection solution with cleaning effect for
use as a soaking bath, bactericide, fungicide, limited virucide, with
good material compatibility for stainless steel, non-ferrous material
and plastics including silicone, slightly alkalic� e�g� 2 % neodisher®
Septo MEDsolution
(B) Fluid, pH-neutral, enzymatic cleaning solution for the treatment
of instruments by machine or manually with very good material
compatibility for stainless steel, non-ferrous material and plastics
including silicone�
or use cleaning / desinfecting machine�
or use a dishwasher�
5. Storing components
After disinfection store the components on a clean and dry cloth�
| 27
Cleaning guidelines